-
Structure
B series is new general designed for the machining requirements from the industries of parts
production and die & mold. B series is widely used in the industries of 3C, automobile and
mold machining.
lAll of 3 axes are equipped with high precision roller type linear guide ways to optimize
acceleration/deceleration. And match the high speed, accuracy and performance
manufacturing requirements.
lExtra rigidity Column design: The unique design of the column structure is more stability
than other comparable models, and beam & column are made of one piece casting
provides the best rigidity and stability.
lSaddle structure:
Ø The ladder type design of linear guide ways on the beam provide wider supporting
surface for saddle, assuring the spindle of a powerful and stable cutting performance.
Ø Fully symmetrical design and perfect thermal equilibrium structural design, reduce high
speed thermal deformation, so that the machine body structure can maintain high stability.
lThe swivel operation cabinet allows users to operate at any angle and position.
lThe wider width of door opening makes working piece easier to be loaded and unloaded.
Table
High precision grinding on working table, assure the basis of the machine precision and reliably.
And has a wide range of processing and load capacity. 10 guide slider under table ensure the
Consistent precision of consecutive operation.
Rigidity Base
T-type base provides the best rigidity and stability.
Spindle Thermal Compensation System (for IBAG build-in only)
Travel |
Unit |
Specification |
X axis travel |
mm |
2500 |
Y axis travel |
mm |
1800 |
Z axis travel |
mm |
800/opt:1100 |
Dist. between spindle nose to table |
mm |
250~1050/opt:180- |
Distance between columns |
mm |
1850 |
Table |
||
Dimension |
mm |
2800x1700 |
Max Load |
kg |
8000 |
T-slot( Width*Pitch*Number) |
mm |
8x22HxP200 |
Spindle |
||
Type |
|
Direct-drive |
Max. spindle speed |
rpm |
10000/12000 |
Spindle motor power(cont. /30 min rated) |
kW |
27/65 |
Spindle taper |
|
BT50/HSK-A100 |
Feedrate |
||
Rapid traverse rate (X/Y/Z) |
m/min |
20/20/20 |
Cutting feed rate (max) |
mm/min |
1-12000 |
Motor power (X DD motor/Y/Z) |
kW |
14.6/8.9/8.9 |
ATC & Maganize |
||
ATC Type |
|
Arm type |
Max. tools |
pcs |
24/32/60/90 |
Max. diameter(next empty) |
mm |
130/250 |
Max. length |
mm |
350 |
Max. weight |
kg |
15 |
Tool shank |
|
BT50/HSK-A100 |
Space & System Requirement |
||
Pneumatic pressure |
Kgf/cm |
6 |
Electrical power consumption |
kVA |
90 |
Machine net weight |
kg |
28000 |
Max. floor space(W*L*H) |
mm |
6500x4100x4300 |
blank
*Specifications are subject to change without notice.
STANDARD: lHEIDENHAIN TNC 620 / TFT 15" LCD lEthernet card,USB &RS-232C Interface lFully enclosed splash guard lSpindle cooler l3 axes absolute encoder
motors lCoolant tank and coolant flushing system lCentralized automatic lubrication system lSpindle air blast。Working lamp lIndication lamp lAnchor bolts, leveling blocks and bolts lScrew type conveyor*2(Table side) lTool kits lWashing gun and air gun lCutting coolant system lCutting air blast lOperation manuals |
OPTIONAL ACCESSORIES: lBuilt-in/Direct type high speed spindle lHeidenhain iTNC 530 MITSUBISHI Controller FANUC Controllerr lLinear scales(3 axes) lTool length measurement system(Blum) lWorkpiece measurement system lAutomatic lubrication system(Grease) lOil mist cutting system lSpindle thermal compensation system (for IBAG spindle only) lTransformer lOil mist collector lCTS lSteel belt type chip conveyor l4th axis lOil skimmer |
■
APPLICAITON: