Overall unit with casting
Reduce the errors of manual welding, and Low deformation and High rigidity
All casting design by box-in-box
structure, light weight and increase structure rigidity.
Integrated base casting
High stability, Low deformation, High rigidity.
Double beam design
Double beam, double saddle, four linear guideway support.
Reduce structure and thermal deformation on cutting.
Double saddle design
Double saddle design, and the lengthen and widen saddle, head and beam to reduce
deformation and increase overall rigidity.
High rigidity head
Three linear guide way and one guide way, full covered with saddle.
Octagon structure and whole foundry head.
Tough and rigidity base casting
T-type structure base increase rigidity, and the strength axes design to increase rigidity and stability,
and ensure the accuracy on high speed machining.
Gantry type column and base
Column and base fixed on foundation, without loading issue and increase machining accuracy.
Double ballscrews and double servo motors
High accuracy, High reaction, High speed.
Heidenhain linear scale
3 axes with Heidenhain linear scale to increase moving accuracy and reduce machining error.
B/C axes with ring scale
Regulate swivel and tilt angle effectively.
Mechanical anti-collision device
3 axes with anti-collision device to reduce machine failure.
Axes with cooler
Regulate moving temperature any time.
Spindle cooler
Temperature control within 0.1 degree.
XY axes with linear motor
Rapid traverse 70 m/min, cutting feed rate 20m/min, rapid without back clearance.
Without interval gap between ballscrew and gear.
Direct-drive without other medium.
TCPM multi-axes synchronous control
Tool center management, reduce extra motion.
Travel |
Unit |
G2532 |
X axis
travel |
mm |
3200 |
Y axis
travel |
mm |
2500 |
Z axis
travel |
mm |
1100 (opt:1400) |
Dist.
between spindle nose to table |
mm |
50~1150/opt:50-1450 |
Distance
between columns |
mm |
3320 |
Table |
||
Dimension |
mm |
3400x2800 |
Max Load |
kg |
5000 |
T-Slot |
|
14x28HxP200 |
Spindle |
||
Type |
|
Build-in |
Max.
spindle speed |
rpm |
24000 |
Spindle
motor power(cont. /S6) |
kW |
30/37 |
Spindle
motor torque(cont./S6) |
Nm |
72/88 |
Spindle
taper |
|
HSK-A63 |
C/B axis |
||
Max.
swivel speed C/B |
rpm |
60/60 |
Max.
torque C/B |
Nm |
1030/1030 |
Clamping
torque C/B |
Nm |
2500/2500 |
Swivel
angle C/B |
degree |
±115/±220 |
Positioning
A/C |
arc.sec |
±3/±3 |
Feedrate |
||
Rapid
traverse rate (X/Y/Z) |
m/min |
20/20/20 opt:60/60/30 |
Cutting
feed rate (max) |
mm/min |
1-20000 |
ATC & Maganize |
||
ATC Type |
|
Armless |
Max. tools |
pcs |
30 |
Max. diameter(next
empty) |
mm |
100/150 |
Max.
length |
mm |
300 |
Max.
weight |
kg |
7 |
Tool shank |
|
HSK-A63 |
Space & System Requirement |
||
Pneumatic
pressure |
Kgf/cm |
7 |
Hydraulic
pressure |
kVA |
90 |
Electrical
power consumption |
kg |
120 |
Max. floor
space(W*L*H) |
mm |
10580*8260*5500 |
Machine
weight (no opt) |
kg |
56000 |
blank
*Specifications are subject to change without notice.
STANDARD: |
OPTIONAL ACCESSORIES: |
●HEIDENHAIN
TNC 640 5-Axis controller -15” screen and Hand
wheel -Ethernet, USB and
RS-232C interface ●3 axis
absolute encoder motors ●Euro
system Build-in Spindle 24000rpm ●2 axis
milling head & angle encoder ●HEIDENHAIN
3 axis Linear scale ●Armless
type 30 Tools magazine ●3 axis
linear guide way/P class/ roller type or same class ●3 axis
ball screw (XY with hollow cooling and surrounding supported device) ●Standard
splash guard (no roof) ●Centralized
auto lubrication system(3 axis & bearings) ●Spindle
cooler ●Spindle
air blast ●Cutting
air blast ●Cutting
coolant system ●Electric
cabinet air conditioner ●Working
lamp & Indication lamp ●Steel belt
type chip conveyor & chip cart ●Oil
skimmer ●Nitrogen
counterbalance system ●Hydraulic
system ●Coolant
flushing system ●Washing
gun & air gun ●Leveling
block and bolt & anchor ●Tool kit ●Operation
manual (electronic file) |
●HEIDEHAIN/SIEMENS/FAGOR
5-Axis Controller ●KinematicsOPT/DCM ●Built-in
high speed Spindle HSK-A63/HSK-A100 ●Spindle
thermal compensation system ●2 axis
milling head ●Magazine
HSK-A63:30/60T, A100:20/40/60T ●Linear
motors-XY axis ●Centralized
auto grease lubrication system ●Tool
length measurement system ●Workpiece
measurement system ●Calibration
ball ●Casting
thermal control system ●Transformer
and regulator ●Oil mist
cutting system ●Oil mist
collector ●Scraper/Compound
type chip conveyor ●Fully
enclosed splash guard (with roof) ●CTS and
ATS |
■ APPLICATION