High Rigidity
■ Adopts T-Shaped and 3-points supported
architecture on base, ensure the consistent precision of consecutive operation.
■ High Precision grinding on working
table, assure the basis of the machine precision and reliably.
■ The unique design of the column
structure is more stability than other comparable modes, and beam & column
are made of on piece casting provides the best rigidity and stability.
■ The ladder type design of linear guide
ways on the beam provide wider supporting surface for saddle, assuring the
spindle of a powerful and stable cutting performance.
■ Whole machine with the FEM analysis, optimal
structure and precision design.
▲3-points supported on base
High Precision
■ Adopts high precision transmissions components to reach
high speed, high precision and high efficiency manufacturing requirements.
■ Whole set is in high rigidity design, sustain high speed
cutting.
■ 3 axes are equipped with linear motors and high
precision linear guide ways to meet the demand of high acceleration and
deceleration.
■ The casting cooling system lower the casting temperature
and thermal displacement.
▲option: The casting cooling system lower the casting
temperature
and
thermal displacement.
High efficiency / Linear Motor Drive
■ Adopts the linear motor drive in 3
axes, no ball screws, assuring high rigidity.
■ Low inertia, high speed, high
acceleration, increase cutting efficiency.
■ No backlash, high positioning and high
machining precision.
■ No abrasion, no noise, prolongs working
life of machine accuracy.
▲3 axes linear motor drive,
high acceleration and positioning
-
Travel |
Unit |
L5 |
X
axis travel |
mm |
500 |
Y
axis travel |
mm |
400 |
Z
axis travel |
mm |
300 |
Dist.
between spindle nose to table |
mm |
100~400 |
Table |
||
Dimension |
mm |
640x500 |
Max.
workpiece |
kg |
300 |
T-Slot |
mm |
6x18HxP80 |
Dist.
from ground to Table |
mm |
760 |
Spindle |
||
Type |
|
Build-in |
Max.
spindle speed |
rpm |
40000 opt:24000/60000 |
Spindle
motor power(s1/max) |
kW |
13/16.9 |
Spindle
motor torque(s1/max) |
Nm |
4.2/5.4 |
Spindle
taper |
|
HSK-E40 opt:HSK-A63/E32 |
Feedrate 3 axes linear motor |
||
Rapid
traverse rate (X/Y/Z) |
m/min |
30/30/30 |
Cutting
feed rate |
mm/min |
1-20000 |
ATC & Magazine |
||
ATC
Type |
|
Armless type |
Max.
tools |
pcs |
12 |
Max.
diameter |
mm |
50 |
Max.
length |
mm |
150 |
Max.
weight |
kg |
4 |
Tool
taper |
|
HSK-E40 |
Space & System Requirement |
||
Pneumatic
pressure |
Kgf/cm |
7 |
Electrical
power consumption |
kVA |
30 |
Machine
weight |
kgs |
6500 |
Max.
floor space(W*L*H) |
mm |
2530*1630*2350 |
*Specifications
are subject to change without notice.
STANDARD: |
OPTION ACCESSORIES: |
lHEIDENHAIN TNC 620 / TFT
15" LCD Ethernet
card,USB &RS-232C Interface l absolute encoder motors l Fully enclosed splash
guard l Spindle cooler lATC l3 axis linear guide way Germany system BOSCH Rexroth / P class/35type/ roller type or same
class lCutting coolant system lCentralized Automatic
lubrication system lSpindle air blast lCutting air blast lWorking lamp lIndication lamp lDrawer type chip
collection box lWashing gun and air gun lCoolant tank lLeveling blocks and bolts lTool kit lOperation manual |
lBuild-in type high speed
Spindle lHEIDENHAIN
TNC 640 controller SIEMENS
controller l3 axes linear scale lArmless type magazine lTool length measurement
system lWorkpiece measurement
system lAuto grease lubrication
system lOil mist cutting system lSpindle thermal
compensation system (for IBAG spindle only) lRegulator and Transformer lOil mist collector lCTS lSpiral type chip
conveyor/Steel belt type chip conveyor/Chip cart lOil
skimmer l4th
axes lCasting
cooling system |
High Performance / High Speed Spindle
■ L
series provides build-in type spindle speed 24000/40000/60000rpm to meet
different machining requirement.
■ The build-in thermal
compensation system (optional: IBAG spindle only) increases the thermal
variation, assuring the accuracy during operation.
■ High performance and high
precision ceramics bears increase cutting rigidity and reduce the tool
vibration.
■ Spindle cooling system reduces thermal variation and prolongs working life of spindle.
▲ Build-in Spindle 40000rpm
HSK-E40, 13/16.9kW